Setting And Adjusting The Projector (Settings & Adjustments); Setting The Security (Network - Security) - Sharp Notevision XG-MB67X Setup Manual

Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for INPUT 1
On these screens, you can make projector
settings or adjustments. You can set or adjust
the following items :
• • • • • Picture Mode
CLR Temp
• • • • •
• • • • • Bright Boost
Progressive (INPUT 3/4)
• • • • •
• • • • • Lamp Setting
Resolution Setting
• • • • •
Signal Type (INPUT 1/2)
• • • • •
Video System (INPUT 3/4)
• • • • •
Resize
• • • • •
Auto Keystone [OFF][ON]
• • • • •
OSD Display [OFF][ON]
• • • • •
• • • • • Background
Setup Guide [OFF][ON]
• • • • •
• • • • • Projection Mode
OSD Language
• • • • •
Auto Search [OFF][ON]
• • • • •
Auto Sync [OFF][ON]
• • • • •
Auto Power Off [OFF][ON]
• • • • •
System Sound [OFF][ON]
• • • • •
Internal Speaker [OFF][ON]
• • • • •
• • • • • RS-232C Speed
Fan Mode [Normal] [High]
• • • • •
• • • • • All Reset
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• For details about each item, refer to the
projector's operation manual.
Controlling the Projector via LAN
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
Items
User Name Setting of user name for
security protection.
Password Setting of password for
security protection.
Accept IP It is possible to set up to three
Address IP addresses allowing connec-
tion to the projector.
All IP No limits are set to IP addresses
Addresses connecting to the projector.
From only
For security improvement, only an
specific IP IP address set by "Address 1-3"
addresses can be connected to the projector.
Note
• User Name and Password can be up to 8
characters.
• You can input the characters below :
a-z, A-Z, 0-9, -, _
Description
-15