C Misfeed In The Transport Area - Sharp AL-1220 Operation Manual

MISFEED REMOVAL
Raise the fusing unit release lever and then close the side cover by pressing the
3
round projections near the side cover open button. The misfeed (
out and the ready (

C Misfeed in the transport area

Lower the fusing unit release lever.
1
6
Push gently on both sides of the front cover to open the cover.
2
36
Do not touch the surface of the drum (green portion) of the drum cartridge
when removing the misfed paper. Doing so may cause smudges on copies.
Do not remove the misfed paper from above the fusing unit. Unfixed toner on
the paper may stain the paper transport area, resulting in smudges on copies.
) indicator will light up.
Fusing unit release lever
) indicator will go