Bypass Feed (Including Special Paper) - Sharp AL-1220 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM
Set the number of copies using the copy quantity (
3
(

BYPASS FEED (including special paper)

The bypass tray automatically feeds up to 50 sheets of standard copy paper and also feeds
special papers such as transparency film and labels one sheet at a time. Copy paper measuring
from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 to 34.5 lbs. can be used in this
tray. (For paper weighing from 28 to 34.5 lbs., 8-1/2" x 11" is the maximum size.)
3
Place the original(s) face up in the document feeder tray or face down on the original
1
table.
Open the bypass tray and extend the tray.
2
22
) key.
The original image must be smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this may cause smudges
on the edges of the copies.
To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until they click.
, ) keys and press the print