Drum Cartridge Replacement - Sharp AL-1000 Operation Manual

Install a new TD cartridge. To install the new cartridge, see page 11, INSTALLING
3
THE TD CARTRIDGE.
Close the front cover and then the side cover by pressing the round projections near
4
the side cover open button. The
will light up.
When closing the covers, be sure to close the front cover securely and then
close the side cover. If the covers are closed in the wrong order, the covers
may be damaged.

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies. When the internal counter
reaches approximately 17,000 copies, the drum replacement required (
up indicating that replacement of the drum cartridge will be needed soon. For more information
on purchasing the drum cartridge, see OPTION AND SUPPLY PART NUMBERS AND
STORAGE on page 38. When the indicator begins to blink, the copier will stop operating until
the cartridge is replaced. Replace the drum cartridge at this time.
Do not remove the protective cover on the drum portion (black paper) of a new
drum cartridge before use. The cover protects the drum against external light.
Open the side cover while pressing the side cover open button.
1
Then, push gently on both sides of the front cover to open the cover.
Gently pull the TD cartridge out while pressing the lock release button. To remove
2
the TD cartridge, see page 26, step 2.
Hold the handle of the drum cartridge and gently pull the cartridge out. Dispose of
3
the old drum cartridge in accordance with local regulations.
TD CARTRIDGE REPLACEMENT
indicator will go out and the ready ( ) indicator
) indicator will light
27
5