Power On; Initial Settings Of Operation Panel - Sharp AL-1000 Operation Manual
Sharp al-1000: operation manual
Hide thumbs
Also See for AL-1000:
- Operation manual (169 pages) ,
- Service manual (93 pages) ,
- Operation manual (34 pages)
Table of Contents
Advertisement
POWER ON
Turn the power switch on the left side of the copier to the "ON" position. The ready (
indicator will light up and other indicators which show the initial settings of the operation
panel will also light up to indicate the ready condition. For the initial settings, see the "Initial
settings of operation panel" described below.
2
Initial settings of operation panel
The copier assumes the initial settings when the copier is turned on or a preset time (auto
clear time) elapses after the last copy is made. The initial settings of the operation panel are
shown below.
16
The copier will enter a power save mode once the set time has elapsed
without any copier operation after the last copy of a run is made or power is
turned on.
The settings of the power save modes can be modified. See page 24, USER
PROGRAMS.
The copier will return to the initial settings a preset amount of time after the
last copy is made. The preset amount of time (auto clear time) can be
changed. See page 24, USER PROGRAMS.
200%
129%
100%
78%
64%
50%
MAX.
5
1
/
8
1
/
8
1
/
11
x
x
2
2
2
100%
1
1
8
/
14
8
/
11
x
x
2
2
8
1
/
11
5
1
/
8
1
/
x
x
2
2
2
ZOOM
MIN.
"0" is displayed in the
display.
)
Hide quick links:
Advertisement
Table of Contents
