Connecting External Devices; External Ports - Fujitsu D3118 Manual

Mainboard D3118

Connecting External Devices

Connecting external devices to the motherboard is an easy task. The standard devices you should
expect to plug into the motherboard are keyboards, mouse, and printer cables. The following
diagram will detail the ATX port stack for the following board:
2xUSB
eSATA
PS2

External ports

The location of the external connections of your mainboard is specified at the beginning of the
manual.
Firewire, white
LAN
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
Earphone / SPDIF, yellow
The LAN RJ45 connector has two LEDs (light emitting diodes).
Left LED
Link established Off:
Blinking green: LAN connection is active
While the ports have been created to accept connectors in only one direction, make sure to
i
be careful when inserting connectors. At times, attaching connectors in the incorrect
orientation can damage, bend and or break the pins.
Fujitsu Technology Solutions
Line
-in
- out
LAN LAN
M I C
USB USB
Port Port
D3118
x16 (x4
x8 (x4
x16 electr.)
electr.)
Gen3
Gen2 Gen3
CPU0
CPU0
PCH
PS/2 mouse port, green
Microphone jack (mono), pink
USB 2.0 - Universal Serial Bus, black
USB 3.0 - Universal Serial Bus, blue
PS/2 keyboard, blue
e-SATA-Anschluss
Right LED
Off: 10 Mbit/s
Green: 100 Mbit/s
Yellow: 1000 Mbit/s
x16 x16 x16
Gen3 Gen3
Gen3
CPU0 CPU1
CPU1
English - 33
PCI
71