Electrolux ETB4600C User Manual page 20

20 www.electrolux.com
4. Refit the runner into the rear of the shelf
on the right hand side and then engage
the front.
5. Fit the carriage by sliding it into the
runners until the front if the carriage
engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice cube tray with potable
water only.
CAUTION
LED lighting
Your appliance is fitted with long life
LED lighting. In the unlikely event the
LED lights should fail, then the LED lights
should be serviced by the manufacturer.
Refer to the warranty page for contact
details.
Automatic Ice Maker
The automatic ice making function pumps
water from the water tank located in the
refrigerator and dispenses it into the automatic
ice maker in the freezer.
The ice will then be dropped into the ice bin
located beneath the ice maker
If the water tank is empty, the ice maker will
automatically turn off after 3 attempts at
pumping water from the tank. The ice maker
indicator on the user interface shows the
operational status of the ice maker (Refer
control instructions).
Water Tank Refilling
Step 1. Pull the tank directly out of the tank
housing frame.
Step 2. Pour potable water through the lid at
the top of the water tank.
Step 3. Push the tank directly into the tank
housing frame. To avoid water leaks ensure that
the tank nozzle fully engages with the
housing socket.
Step 4. Ensure ice maker is switched ON (refer
control instructions).
CAUTION
Do not fill the water tank with anything
other than clean water (Filtered or
Mineral water).
Soft drink, juice, tea or hot water etc,
can damage your automatic icemaker.
The water tank can withstand a
maximum water temperature of 60°C.
IMPORTANT
Remove and clean ice bin and water
tank once a month, discarding unused
ice and water. This will ensure fresh ice
and smooth operation of your icemaker.
Make sure your refrigerator is level to
avoid uneven ice cubes.