Electrolux ETB4600C User Manual page 17

ERROR CODES & ALARMS
Alarms
Alarm Icon
Error codes
Error code
Communication Error
Sensor – Open Circuit /
Short Circuit
What it means
Freezer Temperature Alarm
Activates if the freezer temperature
is 10°c over set temperature for
a period of 50 minutes (except
during a defrost).
An alarm will sound the
temperature icons will flash.
Door Alarm
Activates if the refrigerator or
freezer doors are left open for
longer than 2 minutes.
An alarm will sound and the
affected compartment icon will
flash and the temperature and
icons will fade on and off.
What it means
If you see this icon displayed
(electronic display models) or the
top temperature icon is flashing
it means that the control has lost
contact with the main control
board.
The appliance will operate at its
last known setting, all auxillary
functions will not work.
If you see this icon displayed
(electronic display models) or any
combination of the first, second
and fourth temperature level icons
are flashing it means that an error
has been detected on a sensor.
The refrigerator will run in a default
cycle to prevent food spoilage.
Operation
• To deactivate the alarm for 50
minutes press any button.
• To deactivate alarm for 12 hrs
on the ice & water model press
and hold Select Mode for 10
seconds for non ice and water
models press and hold any
button for 10 seconds.
• Alarm will sound and icon will
flash indicating which door is
open. (Ice & water models)
• To silence the alarm for 8
minutes while the door is open
press any button (the icons will
continue to flash until door is
closed).
What to do...
Turn the unit off at the power
point for 5 minutes and then turn
it back on.
Under most circumstances this
will reset the display enabling
normal function to continue.
If the error re-occurs then call
for service.
Call for service.
EN 17