Changing The Operational Amplifier - Gigabyte G1.Sniper 5 User Manual

Voltage Measurement Points
Users can use a multimeter to measure component voltages, including VRIN, VIOD, VSA, VAXG, VIOA, VRING,
VDIMM, and VCORE. You can employ following way to measure component voltages.
1-9 Changing the Operational Amplifier
TPM
w/housing
TPM
w/housing
TPM
w/housing
TPM
w/housing
TPM
w/housing
TPM
w/housing
TPM
w/housing
Voltage measurement points(G1.Sniper 3)
Voltage measurement points(G1.Sniper 3)
VRIN
Pin 1
Voltage measurement points(G1.Sniper 3)
VIOD
Pin 1
Voltage measurement points(G1.Sniper 3)
VSA
Pin 1
Voltage measurement points(G1.Sniper 3)
VAXG
Pin 1
Voltage measurement points(G1.Sniper 3)
VIOA
Pin 1
Voltage measurement points(G1.Sniper 3)
VRING
Pin 1
Voltage measurement points(G1.Sniper 3)
VDIMM
Pin 1
VCORE
Pin 1
Steps:
Connect the red lead of the multimeter to the pin 1 (Power) of a voltage
measurement point and the black lead to the pin 2 (ground).
Step 1:
Use the included IC extractor to carefully grip the IC's sides and
extract it from the socket.
Step 2:
Align the notch on the OP chip with the notch on the socket and gently
press the chip into the socket until seated.
- 23 -
BIOS Switcher (X58A-OC)
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC) DB_PORT
BIOS Switcher (X58A-OC)
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC)
DB_PORT
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PWM Switch (X58A-OC)
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PWM Switch (X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
BIOS Switcher (SW4)
BIOS Switcher (SW4)
BIOS Switcher (SW4)
Pin No. Definition
BIOS Switcher (SW4)
1 Power
BIOS Switcher (SW4)
2 GND
BIOS Switcher (SW4)
BIOS Switcher (SW4)
BIOS Switcher (SW4)
Hardware Installation
M_SATA
1
M_SATA
1 DIP
M_SATA
1 2 3
DIP
1
1 2 3
M_SATA
DIP
1 2 3
DIP
1 2 3
DIP
1 2 3
DIP
1 2 3
DIP
1 2 3
DIP
1 2 3
PCIe Control (Z87X-UP7)
ATX_12V_2X3
PCIe Control (Z87X-UP7)
ATX_12V_2X3
PCIe Control (Z87X-UP7)
ATX_12V_2X3
DIP
PCIe Control (Z87X-UP7)
1 2 3 4
ATX_12V_2X3
DIP
PCIe Control (Z87X-UP7)
1 2 3 4
ATX_12V_2X3
DIP
PCIe Control (Z87X-UP7)
1 2 3 4
ATX_12V_2X3
DIP
PCIe Control (Z87X-UP7)
1 2 3 4
ATX_12V_2X3
DIP
PCIe Control (Z87X-UP7)
1 2 3 4
ATX_12V_2X3
DIP
1 2 3 4
DIP
1 2 3 4
DIP
1 2 3 4