Table of Contents
Advertisement
Cleaning and Maintenance
Front mesh
1
1
22
English
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 22
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 22
STEP 3 Cleaning and drying the front mesh
• Use water or a soft cloth to remove dust and other foreign
material on the front panel.
• If you cleaned the front mesh with water, dry it thoroughly
before attaching it to the product.
CAUTION
• The frame incorporates the display PBA.
Ensure that the frame does not come in contact with
water. Contact with water causes device failure.
STEP 4 Attaching the front mesh
2
• Attach the front mesh to the front panel as follows:
– Insert the tabs on the front mesh into the slots (①)
at the bottom of the panel, and then push the areas
numbered ② at the top of the mesh.
STEP 5 Attaching the front panel
• Attach the clip wire (①) to the front of the main unit.
• Insert the tabs on the panel into the slots (②) at
the bottom of the main unit, and then press the top
2
Centre of the panel to fasten it.
2021-09-03 오후 2:08:40
2021-09-03 오후 2:08:40
Advertisement
Table of Contents
