Event; Alarm - EverFocus eZ.HD PARAGON FD 16x4 User Manual

6.4 Event

You can configure the Alarm, Video Loss, Motion and Other settings in this menu.
6.4.1

Alarm

Alarm: Select an Alarm input number from 1 to 16.
Enable: Check the box to enable the Alarm trigger function for the selected alarm input.
Log: Check the box to record alarm events to log data.
Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5
seconds before the alarm event occurs. Note that the pre-alarm recording rate will follow the
Normal Speed configured in the earlier section (see 6.2.1 Basic Setting).
Buzzer: Check the box to enable the buzzer when an alarm event is triggered.
Email Notify: Check the box to send email notification with a snapshot file when an alarm
event is detected. Email operation requires valid email entered in the Email setup menu (see
6.7.2 Email).
All manuals and user guides at all-guides.com
78
PARAGON FHD 16x4