Miscellaneous - EverFocus eZ.HD PARAGON FD 16x4 User Manual

6.9.7

Miscellaneous

You can upgrade the latest firmware, restore the factory default settings to the DVR, upload /
save the DVR configuration settings from / to the USB or change the language in this setup
menu.
Note: Whether you want to the USB memory stick to upgrade firmware or to save/load
configurations, it's recommended to connect it to the USB port on the REAR panel of the
DVR.
Firmware
Current Firmware Version: Shows the current firmware version of the DVR.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware file
to the USB memory stick and then please connect the USB memory stick to the USB port on
the REAR panel of the DVR.
Configurations
Load Factory Default: Click to restore the DVR to factory default settings. The User Account,
Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the DVR configurations restored in the USB flash device.
Save To USB: Click to save the DVR configurations to the USB flash device.
Language: Choose which language the DVR uses.
Allowed Remote Reboot: Check the box to enable restarting the DVR via the Network.
All manuals and user guides at all-guides.com
126
PARAGON FHD 16x4