Table of Contents
Advertisement
3. Picture
a) 100 Hz, 625P mode (PAL) . . . . Correcting point: Horizontal 8 x Vertical 8 (Arrow marks denote correcting point)
The first picture
The first picture
Crosshatch pattern. Pattern colors are three color display. Cur-
sor is blinking in red. When changed, condition is last memory
state.
Cursor is .......... Data change mode in lighting,
Cursor shifting mode in blinking.
Cursor color
Display color shows the color that data change is possible.
The second picture
When entering from the first picture to the second picture, cor-
recting wave of convergence is muted for one second.
During this period, the changed data is transferred from RAM
QH001 to QH713 (PAL 100Hz) QH714 (PAL 625P), and saved.
All manuals and user guides at all-guidesbox.com
Cursor (red)
Screen center
(Blinking)
Red: Yellow
Green: Green
Blue: Blue
– 21 –
The second picture
Data display
The second picture is indicated with data on top left of the first
picture, therefore, convergence cannot be adjusted by this pic-
ture.
Caution:
, Receive suitable signal for adjustment.
, Be sure to check if centering is adjusted correctly before
adjusting convergence.
Advertisement
Table of Contents
