Table of Contents
Advertisement
1-2-3. Adjustment menu
• Before adjusting convergence, make sure that the main adjustment has been done correctly.
• To do the adjustment for each mode of NO.1, 3-8, the suitable signal and picture mode corresponding with each mode
are necessary.
• Basing on the data of PAL 100Hz, the other data of whole modes can be calculated and saved after entering ''PAL TO
ATHER ALL'' in NO.2. Never do this unless there is a excessive deviation, otherwise a data other than PAL 100 Hz
may be overwritten in.
No.
Item
1
ADJUST PAL 100Hz
2
PAL TO OTHER ALL
3
ADJUST PAL 625P
4
ADJUST NTSC 525P
5
ADJUST 1080i 50 Hz 4:3
6
ADJUST 1080i 50 Hz 16:9
7
ADJUST 1080i 60 Hz 4:3
8
ADJUST 1080i 60 Hz 16:9
All manuals and user guides at all-guidesbox.com
Description
Allows manual adjustment in PAL mode.
Perform the adjustments according to dimensions specified.
Automatically saves auxiliary forecasted data by referring PAL 100Hz screen.
The calculated data are saved on PAL 625P, NTSC 525 P, 1080i 50 Hz 4:3, 16:9,
1080i 60 Hz 4:3, 16:9 screen, and then the operation completes.
In this case, PAL 625P, NTSC 525P, 1080i 50 Hz 4:3, 16:9, 1080i 60 Hz 4:3, 16:9
screens are created through the calculation process. Perform check in manual mode,
and correct them if there are some problems in color deviation, distortion, etc..
Take care that PAL 625P, NTSC 525P, 1080i 50 Hz 4:3, 16:9, 1080i 60 Hz 4:3, 16:9
screens will be modified again when adjusting with this menu selected.
Allows manual adjustment for PAL 625P screen.
Select this mode when performing adjustment for color matching and correction of
distortion for PAL 625P are required.
Perfom the adjustments according to dimensions specified.
Allows manual adjustment for NTSC 525P screen.
Select this mode if color adjustment and distortion correction for NTSC 525P are
necessary.
Perfom the adjustments according to dimensions specified.
Allows manual adjustment for 1080i 50 Hz 4:3 screen.
Select this mode if color adjustment and distortion correction for 1080i 50 Hz 4:3
screen are necessary.
Perfom the adjustments according to dimensions specified.
Allows manual adjustment for 1080i 50 Hz 16:9 screen.
Select this mode if color adjustment and distortion correction for 1080i 50 Hz 16:9
screen are necessary.
Perfom the adjustments according to dimensions specified.
Allows manual adjustment for 1080i 60 Hz 4:3 screen.
Select this mode if color adjustment and distortion correction for 1080i 50 Hz 4:3
screen are necessary.
Perfom the adjustments according to dimensions specified.
Allows manual adjustment for 1080i 60 Hz 16:9 screen.
Select this mode if color adjustment and distortion correction for 1080i 50 Hz 16:9
screen are necessary.
Perfom the adjustments according to dimensions specified.
– 19 –
Advertisement
Table of Contents
