Wan Connection - D-Link DVG-N5402G/ACF Quick Installation Manual

Wireless ac1200 dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, 1 pstn (lifeline) port, and usb port

Hide thumbs Also See for DVG-N5402G/ACF:

Table of Contents

DVG-N5402G/ACF

3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB

modem, then prior to creating a 3G WAN connection, proceed to the

modem / PIN menu and enter the PIN code on the page displayed

If the PIN code check for the SIM card inserted into your USB modem is

disabled, an active 3G WAN connection will be automatically created on the

Net / WAN page when connecting a USB modem to the router

connection has not been created automatically, create a new connection

manually.

1. Go to the Net / WAN page and click the Add button.

In the General settings section, from the Provider drop-down list,

select your country and operator to automatically specify all settings

required to connect to the Internet. To specify all settings independently,

leave the Manually value.

From the Connection Type drop-down list, select the 3G value.

4. Make sure that the USB value is selected from the Interface drop-down

list.

5. Specify a name for your connection (any name for easier identification) in

the Name field.

5 For GSM USB modems only. For CDMA USB modems, it is required to disable the

PIN code check on the identification card prior to connecting the USB modem to the

router.

6 For GSM USB modems only.

Quick Installation Guide

3G/LTE

If the

Table of Contents