Bosch DF481700F Use And Care Manual page 39

Issue
E:6103 lights up. Water is not
draining.
E:9001 lights up.
E:9240 lights up.
A different error code appears in
the display window.
E:0100 to E:9010
Dishware is not dry.
Cause and troubleshooting
Secure the cover of the drain pump so it clicks into place or clean the drain
▶
pump.
Not an appliance error. High loop is missing and/or debris flushed back into drain
hose and blocked it.
Be sure there is a high loop in the drain hose and that no debris has flushed back
▶
into the hose.
Power voltage is too low.
There is no problem with the appliance.
Call an electrician.
1.
Have the power voltage and electrical installation checked by an electrician.
2.
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 35
There is a technical issue.
Press .
1.
Pull out the power cord plug of the appliance or switch off the breaker.
2.
Wait at least 2 minutes.
3.
Insert the power cord plug of the appliance in a power outlet or switch on the
4.
breaker.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press ⁠ .
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service → Page 47 and give the error code.
‒
No rinse aid used or dosage set too low.
Add Rinse aid → Page 24 .
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 25
Cycle or cycle option has no drying phase, or drying phase is too short.
Select a wash cycle with drying. → Page 12
▶
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.
Troubleshooting en-us
39