Table of Contents
Advertisement
16.1 Home Connect® quick start
Connect your appliance to a mobile device quickly and
easily.
Setting up the Home Connect® app
Install the Home Connect® app on your mobile device.
1.
1
Start the Home Connect® app and set up access for
2.
Home Connect®.
The Home Connect® app guides you through the entire
registration process.
Setting up Home Connect®
Requirements
The Home Connect® app is installed on your mobile
¡
device.
The appliance receives signals from the WLAN home
¡
network (Wi-Fi) at its installation location.
Open the Home Connect® app and scan the following
1.
QR code.
Follow the instructions in the Home Connect® app.
2.
16.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are
1
trademarks of Google LLC.
16.3 Remote Start
You can use the Home Connect® app to start the
appliance with your mobile device.
Tip: If you select "Permanent" in the Basic settings
→ Page 32 of this function, the function is permanently
activated, and you can start your appliance with a mobile
device at any time.
Activating Remote Start
When you have selected "Manual" in the basic settings of
this function, activate the function on your appliance.
Requirements
The appliance is connected to your WLAN home
¡
network.
The appliance is connected to the Home Connect® app.
¡
"Manual" is selected in the Basic settings → Page 32 of
¡
this function.
A program is selected.
¡
Press .
▶
If you open the appliance door, the function is
automatically deactivated.
button lights up.
a
Tip: To deactivate the function, press .
16.4 Remote Diagnostics
The Customer Service can access your appliance via
Remote Diagnostics if you ask them to do so, if your
appliance is connected to the Home Connect® server and
if Remote Diagnostics is available in the country where
you are using the appliance.
Tip: Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com.
16.5 Software update
You can use this function to update the software of your
appliance, e.g. for optimization, troubleshooting or safety-
relevant updates.
The Home Connect® app informs you about available
software updates.
16.6 Data Protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the Home Connect®
server (initial registration):
Unique appliance identification (consisting of appliance
¡
codes as well as the MAC address of the installed Wi-Fi
communication module).
Home Connect® en-us
33
Advertisement
Table of Contents
