Figure 31. Remove two screws
Screw specifications
M1.2 x L1.7
Step 4.
Remove the touchpad.
Figure 32. Remove the touchpad
Go to
https://support.lenovo.com/partslookup
part:
Touchpad
Remove the LCD unit
Make sure the following FRU (CRU) has been removed.
"Remove the lower case" on page 35
"Remove the heat sink" on page 39
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the four pieces of tape.
50
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part number of the following replacement