BenQ V5000i User Manual page 40

HDMI Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto
Automatically selects a suitable color range for the incoming HDMI signal.
• Limited
HDMI Settings
Utilizes the Limited range RGB 16-235.
• Full
Utilizes the Full range RGB 0-255.
HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission.
HDMI EDID
Switch the HDMI EDID version for each HDMI port between Enhanced, or
Standard (depending on the port) in order to solve compatibility issue with
certain old players.
• Enhanced: Can switch to HDMI 2.0 EDID (support 4K 60Hz HDR/HDR+)
• Standard: Can switch to HDMI 1.4 EDID. Use this mode when you
experience abnormal display issue with uncertain old players. HDMI1.4
EDID can support up to 1080p 60Hz.
HDMI Settings
HDMI Device Control
When you enable this function and connect an HDMI CEC-compatible device
to your projector with an HDMI cable, turning on the HDMI CEC compatible
device automatically turns on the projector, while turning off the projector
automatically turns off the HDMI CEC compatible device.
HDMI Power On/Off Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device
and the projector.
• On: The projector will output 48Hz, 50Hz, 60Hz,100Hz, 120Hz, 240Hz
24P Real
depending on different input timing.
Cinema
• Off: The projector will only output 60Hz.
Reset Display Returns all the settings on the Display menu to the factory default values.
Installation menu
Projector The projector can be installed on a ceiling behind a screen, or with one or
more mirrors. See
Position
Screen Allows you to adjust the following settings to fine-tune the projected image.
Adjustment
40 Menu operation
Obtaining a preferred projected image size on page 15.