Table of Contents
Advertisement
• HLG: Delivers Hybrid Long Gamma effects by adding a logarithmic curve
with extra brightness over the top of the signal. This mode is only available
when HLG is enabled.
• ISF Night: Only available when ISF is enabled.
Picture Mode
• ISF Day: Only available when ISF is enabled.
• User: Recalls the settings customized based on the current available
picture modes. See
A variety of sound modes enables the user to select and adjust the best
Sound Mode
mode that matches current environment.
Light Source
See
Mode
This menu allows you to make manual adjustments to the projected image
to correct for any distortions or to fine-tune the image, including configuring
the following settings:
• 2D Keystone: See
• Auto Screen Fit: This function automatically detects the edges of the
screen and adjusts the image to fit it.
Screen
Adjustment
For more information on how to ensure that the Auto Screen Fit feature works properly, see
Auto Screen Fit on page
• Manual Screen Fit: This function allows you to use the
buttons on the remote control to manually adjust the sides and edges of
the image to fit the screen.
Details
Adjusts the level of detail clarity. The higher the effect, the more details will
be shown but with lower black performance.
Adjustment
The projector can automatically adjust the brightness levels of your image
HDR
according to the input source. You can also manually select a brightness
level to display better picture quality. When the value is higher, the image
Brightness
becomes brighter; when the value is lower, the image becomes darker.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture Mode menu.
• Light Source Mode: Shows the selected mode in the Light Source Mode
menu.
• 3D Format: Shows the current 3D mode.
Information
• Color System: Shows the color system used, e.g. YUV444-16bit-BT2020.
• Dynamic Range: Shows the picture dynamic range, e.g. SDR, HDR10, HLG,
etc.
• Light Source Usage Time: Shows the number of hours the light source has
been used.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the projector's serial number.
Sound Mode on page
Extending light source life on page
Correcting keystone on page
41.
33.
46.
16.
,
,
, and
Menu operation
33
Advertisement
Table of Contents
