For The Electrician - Scotsman NDE554 Service Manual

NDE554 & NDE654

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES
Connect the electrical power to the unit
to the power leads in the junction box at
ELECTRICAL
the rear of the machine.
POWER
Check the nameplate (located on the
back panel) for the voltage
requirements, and for the minimum
circuit ampacity. The machine requires
a solid chassis to earth ground wire.
The ice maker should be connected to
its own electrical circuit so it would be
individually fused. Voltage variation
must remain within design limitations,
even under starting conditions.
All external wiring must conform to
national, state, and local electrical
codes. The use of a licensed
electrician is required to perform the
electrical installation.
JUNCTION
BOX
March 2000
Page 7