Samson 3273 Mounting And Operating Instructions page 7

Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for the mounted actuator, e.g. for Type 3271 or
Type 3277 Pneumatic Actuator:
u EB 8310-2 (1000 cm²) (Type 3271 only)
u EB 8310-3 (1400-60 cm²) (Type 3271 only)
u EB 8310-4 (355 cm²)
u EB 8310-5 (175 and 750 cm²)
u EB 8310-6 (240, 350 and 700 cm²)
− Mounting and operating instructions for the valve on which it is mounted
− u AB 0100 for tools, lubricant and tightening torques
− When a substance is used in the device, which is listed as being a substance of very high
concern on the candidate list of the REACH regulation:
Information on safe use of the part affected
u www.samsongroup.com > About SAMSON > Material Compliance > REACH
If a device contains a substance which is listed as being a substance of very high concern
on the candidate list of the REACH regulation, this circumstance is indicated on the
SAMSON delivery note.
EB 8312-2 EN
Safety instructions and measures
7