Eclipseä 1300, 1600
Water and Drain
Water Supply: Connect a supply of cold, potable
water to the 3/8" fitting on the right side of the
cabinet. A male flare fitting is on the unit.
Note: This is an NSF listed ice machine and
contains provisions for back-flow prevention in its
design. No external back flow preventer is
required.
Drain: Connect rigid drain tubing to the reservoir
drain fitting. Route the drain either out the back or
to the left side. Add a 18" vertical vent to the drain
tube.
Potable
Water Inlet
Reservoir
Drain
Back View, Drain Tubing Installed for Back Drain
September 2003
Page 22
Route the drain tubing to the building drain. Do not
"Tee" into any other drain, including the bin or
dispenser drain.
Follow all local codes.
Removable Plate
Purge Valve