Sony NXCAM HXR-NX80 Operating Manual page 9

Attaching the XLR handle unit
1 Remove the Multi Interface Shoe cap.
2 Remove the handle shoe cap.
3 Align the mark on the XLR handle with
the one on the camcorder, and insert the
XLR handle unit in the direction of the
arrow.
4 Press and turn the handle mounting
screws to tighten them.
z Tips
• When attaching the XLR handle unit, make sure
to securely tighten both handle mounting
screws.
• If you use the XLR handle unit without securely
tightening the mounting screws, it may damage
9
Continued ,