Sony NXCAM HXR-NX80 Operating Manual page 85

• Some frames may not be played, depending on
the network status.
• The image quality of fast-changing scenes may
be adversely affected.
z Tip
• If an error occurs during streaming distribution
standby or during streaming distribution, a
message appears. If [RECONNECT] appears,
selecting it will attempt to reconnect the
camcorder. Selecting [END] will disconnect the
camcorder. Repeat the procedure from step 1 to
reconnect.
To record using the camera while
streaming
You can record movies in XAVC S or
AVCHD on a memory card while
streaming is in progress.
Press the START/STOP button (handle
record button) after the camcorder enters
streaming standby mode to start recording.
To stop recording, press the START/STOP
button (handle record button) again.
The camcorder recording status is displayed
using the following indicators.
STBY: Standby mode
REC: Recording
b Note
• During streaming, switching the current slot
using the SLOT SELECT button or removing/
inserting media is not possible.
Camcorder operation during
streaming
The following functions are enabled during
streaming. Use the hardware switches and
buttons to control the camcorder. Operation
from the menu is not supported.
• Zoom
• Focusing
• To adjust the output audio level, adjust the
input level using the AUDIO LEVEL dial
of the XLR handle unit.
• Exposure adjustment (iris, ISO
sensitivity/gain, and shutter speed)
• White balance
85