Sony NXCAM HXR-NX80 Operating Manual page 87

• The status of the network connection
is displayed using the following icons.
Icon Meaning
Before wireless LAN
connection and after
disconnection
Wireless LAN connection
Wired LAN connection
• To cancel RTMP/RTMPS streaming,
press the MENU button or press the
ASSIGN button assigned with the
[RTMP/RTMPS] function, or select
.
• When connection is successful,
appears on the screen and the
camcorder is ready to start streaming.
4
Press the THUMBNAIL button to
start RTMP/RTMPS streaming.
• The screen icon changes to
5
Press the THUMBNAIL button
again to stop RTMP/RTMPS
streaming.
b Notes
• The RTMP/RTMPS function is not available
when using the following functions.
– When the file format is XAVC S 4K
– In the following formats when the file format
is XAVC S HD:
1080/120p 100 Mbps, 1080/100p 100 Mbps
– In the following formats when the file format
is AVCHD:
1080/60p, 1080/50p, 720/60p, 720/50p
– During movie recording/playback
– During thumbnail display
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION)
– When executing other network functions
• The following functions are not available when
the RTMP/RTMPS function is on.
– Functions listed in "Unavailable functions
during streaming" (p. 84) in "Using the
streaming function (STREAMING)"
• Only wired LAN connection is supported when
[AIRPLANE MODE] is set to [ON].
• During RTMP/RTMPS streaming, the
camcorder does not turn off even if the LCD
screen is closed and the viewfinder is returned
to its original position.
• [LCD BRIGHT] is fixed to [NORMAL].
• RTMP/RTMPS streaming transmits the raw
video and audio data via the Internet.
Accordingly, the data may be disclosed to other
parties.
• Check that the RTMP/RTMPS streaming data is
being received by the receiving device.
• Data may be transmitted to a third party if the
address or other settings are configured
incorrectly.
• Some frames may not be played, depending on
the network status.
z Tip
.
• If an error occurs during RTMP/RTMPS
streaming standby or during RTMP/RTMPS
streaming, a message appears. If
[RECONNECT] appears, selecting it will
attempt to reconnect the camcorder. Selecting
[END] will disconnect the camcorder. Repeat
the procedure from step 1 to reconnect.
To record using the camera while
RTMP/RTMPS streaming
Press the START/STOP button (handle
record button) to start recording.
To stop recording, press the START/STOP
button (handle record button) again.
The camcorder recording status is displayed
using the following indicators.
87
Continued ,