Warranty; Know Your Unit; Assembly Instructions - Craftsman INCREDI-PULL 316.791961 Operator's Manual

FOR 2 YEARS from the date of purchase, this product is warranted against any defects in material or workmanship. Defective product will receive free repair or
free replacement if repair is unavailable.
For warranty coverage details to obtain repair or replacement, visit the web site: www.craftsman.com
This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include:
• Expendable items that can wear out from normal use within the warranty period, such as cutting line, filters or spark plugs.
• Product damage resulting from user attempts at product modification or repair or caused by product accessories.
• Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
• Preventive maintenance, or repairs necessary due to improper fuel mixture, contaminated or stale fuel.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
APPLICATIONS
As a trimmer:
• Cutting grass and light weeds.
• Edging
• Decorative trimming around trees, fences, etc.
Hassle Free ® Cutting Head
INSTALL CUTTING ATTACHMENT SHIELD
WARNING:
To prevent serious personal injury, never operate
the unit without the cutting attachment shield in place.
Use the following instructions if the cutting attachment shield on the unit is
not installed.
1. Place the cutting head shield onto the guard mount bracket, making
sure to align the holes on the shield with the ones in the guard mount
bracket. (Fig. 1)
2. Take the 2 shield screws and screw each one into the shield until finger
tight.
WARRANTY STATEMENT
CRAFTSMAN 2 YEAR FULL WARRANTY
Sears Brands Management Corporation, Hoffman Estates, IL 60179

KNOW YOUR UNIT

D-Handle
Attachment
Shaft
Cutting Head Shield
Line Cutting
Blade

ASSEMBLY INSTRUCTIONS

Muffler
Starter Rope
Grip
Shaft Grip
On/Off Control
Throttle
Control
Red Cold Weather
Starter Lever
Convertible™
Coupler
3. Using an appropriate screw
driver, tighten the screws
until the shield is firmly in
place. Make sure the screws
are tightened equally so
there is a balanced gap
between the bracket and the
shield on each side.
4
Spark Plug
Oil Fill Plug
Fuel Cap
Air Filter
Cover
Cutting
Head Shield
Fig. 1
Primer Bulb
(2) Screws
Guard
Mount
Bracket