Figure 32. Remove two screws
Screw specifications
M2.5 x L2.2
Step 3.
Rotate the LCD module to an angle of more than 90 degrees. Take out the EDP cable and then
remove the LCD module.
Figure 33. Remove the LCD module
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD module
Remove the upper case (with keyboard and touchpad)
Make sure the following FRUs (CRUs) have been removed.
48
Lenovo ThinkBook 16p Gen 3 Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following