Overview - Stihl MSA 160 C Instruction Manual

English
► In addition to this User Manual, you should
also read, understand and retain the following
documents:
– User Manual for STIHL AR battery
– User Manual for "AP belt bag with connect‐
ing cable"
– Safety notices and precautions for
STIHL AP battery
– User Manual for STIHL AL 101, 301, 301-4,
500 chargers
– Safety information for STIHL batteries and
products with built-in battery:
www.stihl.com/safety-data-sheets
For further information on STIHL connected,
compatible products and FAQs, please visit
www.connect.stihl.com or available from a STIHL
servicing dealer.
®
The Bluetooth word mark and logos are regis‐
tered trademarks owned by Bluetooth SIG, Inc.
These word marks/logos are used by STIHL
under license.
Batteries with are equipped with a Bluetooth
radio interface. Local operating restrictions (in
aircraft or hospitals, for example) must be
observed.
2.2 Warning Notices in Text
DANGER
■ This notice refers to risks which result in seri‐
ous or fatal injury.
► Serious or fatal injuries can be avoided by
taking the precautions mentioned.
WARNING
■ This notice refers to risks which can result in
serious or fatal injury.
► Serious or fatal injuries can be avoided by
taking the precautions mentioned.
NOTICE
■ This notice refers to risks which can result in
damage to property.
► Damage to property can be avoided by tak‐
ing the precautions mentioned.
2.3 Symbols in Text
This symbol refers to a chapter in this
instruction manual.
34
3

Overview

3.1 Chainsaw and Battery
1
8
7
11
15
16
17
®
1 Rear hand guard
The rear hand guard protects the right hand
against contact with the saw chain if the chain
breaks or comes off the bar.
2 Chain sprocket
The chain sprocket drives the saw chain.
3 Tensioning gear
The tensioning gear moves the guide bar and
thus tensions and slackens the saw chain.
4 Spiked bumper
The spiked bumper supports the chainsaw
against the wood while cutting.
5 Saw chain
The saw chain cuts the wood.
6 Guide bar
The guide bar supports and guides the saw
chain.
7 Chain sprocket cover
The chain sprocket cover covers the chain
sprocket and fastens the guide bar to the
chainsaw.
8 Adjusting wheel
The adjusting wheel is used to adjust the
chain tension.
9 Chain catcher
The chain catcher catches the saw chain if it
breaks or comes off the bar.
2
3
10
9
12
13
20
14
18
19
0458-701-9821-G
3 Overview
4
5
6
23
22
21
#