Overview - Stihl MSA 220.0 T Instruction Manual

3 Overview

2.3 Symbols used with warnings in
the text
WARNING
■ This symbol indicates dangers that can cause
serious injuries or death.
► The measures indicated can avoid serious
injuries or death.
NOTICE
■ This symbol indicates dangers that can cause
damage to property.
► The measures indicated can avoid damage
to property.
3 Overview
3.1 Chainsaw and Battery
#
7
8
1
2
9
10
11
15
24
23
22
21
1 Chain sprocket
The chain sprocket drives the saw chain.
2 Tensioning screw
The tensioning screw is used to adjust the
chain tension.
3 Spiked bumper
The spiked bumper supports the chainsaw
against the wood while cutting.
4 Chain catcher
The chain catcher catches the saw chain if it
breaks or comes off the bar.
5 Guide bar
The guide bar supports and guides the saw
chain.
0458-007-9621-B
3
4
5
6
28
25
16
17
18
26
19
#
20
6 Saw chain
The saw chain cuts the wood.
7 Felling notch
The felling direction can be controlled by the
felling notch.
8 Chain sprocket cover
The chain sprocket cover covers the chain
sprocket and fastens the guide bar to the
chain saw.
9 Nut
The nut secures the chain sprocket cover to
the chainsaw.
10 Chain scabbard
The chain scabbard protects against contact
with the saw chain.
11 Front hand guard
The front hand guard protects the operator's
left hand against contact with the saw chain
and is used to engage the chain brake in the
event of kickback.
12
12 Unlock button
The unlock button is used to switch on the
chainsaw.
13
13 "CHAIN BRAKE" LED
14
This LED indicates whether the chain brake is
engaged.
14 "STATUS" LED
This LED shows the status of the chainsaw.
15 Trigger lockout
The trigger lockout unlocks the trigger.
27
16 Control handle
The control handle is used to control, hold
and guide the chainsaw.
17 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
18 Battery compartment
The battery compartment holds the battery.
19 Air filter
The air filter filters the air entering the engine.
20 Ring
The ring is used for hanging the chainsaw
while working in a tree.
21 Oil pump adjusting screw
The oil pump adjusting screw is used to
adjust the saw chain oil feed rate.
22 Oil tank cap
The oil tank cap closes the oil tank.
English
31