Table of Contents
Advertisement
Tab
Notch
Position the notches in the outer rim of the globe so they
line up with the tabs on the light kit assembly. Carefully
lift the globe up inside the light kit assembly as far as it
will go. Rotate the globe in a clockwise direction until it is
held tightly in place by the three tabs.
Note:
Fan style may vary.
Ceiling Bracket
Downrod
Installing the Glass and Light Fixture Cage
Cage
Assembly Screw
Make sure the cage assembly is securely
attached to the light kit assembly. Failure to
properly secure all three assembly screws
could result in the light kit falling.
Hanging Fan
Wiring
Lift the cage assembly into place
IMPORTANT
Canopy
Blades
Note:
Fan style may vary.
bag
Install the three cage assembly
screws and tighten all three
screws securely.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
Light
Bulbs/Cage
1886
3 of 3
Cage Assembly
Screw
10
Remote Cradle
Advertisement
Table of Contents
