Dadf Exit Sensor; Dadf Length_Width Sensor - Samsung MULTIXPRESS CLX-9251 Series Service Manual

3. Disassembly and Reassembly

3.3.28.8. DADF Exit sensor

1. Remove the DADF Frame-Main. (Refer to 3.3.28.4)
2. Remove the sensor after unplugging the connector.

3.3.28.9. DADF Length_Width sensor

1. Remove the DADF Stacker. (Refer to 3.3.28.3)
2. Release the sensor cover after removing 3 screws.
3-50
3. Remove the defective sensor after unplugging the
connector.
• A, B : Paper Length sensor
• C, D, E : Paper Width sensor
Copyright© 1995-2016 SAMSUNG. All rights reserved.