Ope Unit - Samsung MULTIXPRESS CLX-9251 Series Service Manual

3. Disassembly and Reassembly

3.3.6. OPE Unit

NOTE
Due to LCD End-Of-Life(EOL), new OPE unit has been
developed. Old OPE unit can not be supplied. If old OPE
has any problem, it must be replaced with a new Assy. For
more information, refer to SVC bulletin.
1. Remove the OPE overlay cover.
2. Remove the sticker covering the screw hole.
3-18
3. Remove the cover[A] after removing 2 screws.
4. Remove 2 screws from the front.
5. Open the side cover. Remove 2 screws.
Copyright© 1995-2016 SAMSUNG. All rights reserved.