Go to
https://support.lenovo.com/partslookup
part:
EDP cable
Remove the hinge
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 37
"Remove the strip cover" on page 39
"Remove the hinge rubber" on page 40
"Remove the LCD module" on page 40
Step 1.
Remove six screws.
Figure 29. Remove six screws
Screw specifications
M2 x L2
Step 2.
Remove the hinge.
Figure 30. Remove the hinge
Go to
https://support.lenovo.com/partslookup
part:
Hinge
Remove the LCD cover
Make sure the following FRUs (CRUs) have been removed.
to look up the Lenovo part number of the following replacement
Number of screws
6
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
43