Table of Contents
Advertisement
• When the appliance has a
malfunction, the red light flashes.
Beam-on-Floor is off when
the appliance is deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle is finished,
check the control panel.
4. CONTROL PANEL
On/off button
1
Display
2
Program touch button
3
Delay touch button
4
MyFavourite touch button
5
4.1 Indicators
Indicator
5. PROGRAMMES
The numbering of the programmes in the
table (P1, P2, etc.) reflects their
sequence on the control panel.
1
Description
Salt indicator. It is on when the salt container needs refilling. It is always
off while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It
is always off while the programme operates.
3.2 Internal light
The appliance has an internal lamp. It
comes on when you open the door or
switch the appliance on while the door is
open.
The lamp goes off when you close the
door or switch the appliance off.
Otherwise, it goes off automatically after
some time to save energy.
2
4
5
3
TimeSaver touch button
6
XtraDry touch button
7
SprayZone touch button
8
Indicators
9
The order of the programmes in the table
may not reflect their sequence on the
control panel.
ENGLISH
6
7
8
9
7
Advertisement
Table of Contents
