Table of Contents
Advertisement
How to activate TimeSaver
Press
.
The related indicator is on.
The display shows the updated
programme duration.
7.3 SprayZone
The SprayZone option provides the best
washing results for heavily soiled items.
The option operates within the
designated area in the lower basket and
ensures the highest water pressure and
temperature.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
CAUTION!
Make sure that items placed
in the SprayZone do not
block the upper spray arm.
How to activate SprayZone
Press
.
The related indicator is on.
The display shows the updated
programme duration.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
ENGLISH
15
Advertisement
Table of Contents
