Part 4: Operation; Operating Tips - Philco PEW 612 User Manual

PART 4: OPERATION

Remove the protective foil from the control panel.
Exhaust power selection
This range hood is equipped with 5 levels of exhaust power. Select the power level based on the use of the
stove and the amount steam that the pots emit.
To turn on the motor press the
button to increase the exhaust power and the – button to reduce the exhaust power.
Automatic timer (TIMER)
Press and hold the button at the set exhaust power level for at least 2 seconds and the automatic timer
function will be turned on for a period of 15 minutes. When the function is turned on, the respective symbol
will appear on the display and the motor will turn o automatically after 15 minutes.
NOTE:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to
leave the range hood running a few minutes longer than the stove to ensure that all odours are extracted.
Lighting
The range hood is equipped with lighting. Press the button with the light symbol to turn on the lights. Press
the button again to turn the lights o .

Operating tips

1. Regularly clean the aluminium lters and regularly replace the carbon lters.
2. Use the medium exhaust power level. Only use the highest power level when necessary.
3. To ensure proper ventilation, leave windows closed while the appliance is turned on.
BOOST INTENSIVE VENTILATION MODE
The model have been purchased has intensive ventilation mode with the intent of energy e ciency.
Boost Mode: Product symbol (b) will be appearing on the screen when the latest speed is in use .
The symbol b signi es boost mode ( intensive ventilation) is active.
Product will be working along 6 minutes with this mode and the symbol b will blink during this time.
At the end of 6 minutes product will be passing to lower speed level automatically and will proceed working
in this speed level.
NOTE:
Timer feature is not used in boost mode.
Copyright © 2015, Fast ČR, a. s.
button and to set the exhaust power level press the + or – button. Press the +
EN - 13
02/2015