6.5
Horn button (All EU/BR/CN models)
6.6
Light switch (All EU/BR/CN models)
6.7
Light switch (XCF‑W)
(XCF‑W)
The stop button
Possible states
•
The stop button
the ignition circuit is closed and the engine can be started.
•
Stop button
is interrupted, a running engine stops, and a non-running
engine will not start.
E00821-10
1
Horn button
Possible states
•
The horn button
•
The horn button
position.
S01303-10
1
The light switch
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – The light switch is turned counter-
clockwise. In this position, the high beam and the tail
light are switched on.
S01307-10
1
The light switch
ment on the left.
Possible states
Light off – Light switch is pressed in up to the stop. In this
•
position, the light is switched off.
Light on – Light switch is pulled out to the stop. In this posi-
•
tion, the low beam and tail light are switched on.
V01748-10
1
is fitted on the left side of the handlebar.
is in the basic position – In this position,
pressed – In this position, the ignition circuit
is fitted on the left side of the handlebar.
is in the basic position
is pressed – The horn is operated in this
is fitted on the left side of the handlebar.
is attached next to the combination instru-
CONTROLS 6
17