Sceptre X460BV-FHD User Manual page 46

Problems Solutions
SWITCHING A Different channels and inputs will sometimes have this effect
CHANNEL OR because the channel signal's own volume is already loud.
SOURCE CHANGES There is no way remove this completely. The TV has an
THE VOLUME AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR When your TV's resolution is higher than the digital channel's
TRASH PIXELS ON broadcast resolution, the signal is up-converted to match your
THE SCREEN TV's resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH The TV is an ideal platform for viewing High Definition
DEFINITION USERS Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
TIPS FOR Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX commonly formatted for standard 4:3 TVs. The TV has the
CONTENT USERS capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
I CANNOT FIND THE The buttons are represented by the ▲▼◄► buttons located
VOLUME AND on the remote control. ▲▼ changes the channels and ◄►
CHANNEL changes the volume.
CHANGING
BUTTONS
TV TURNS OFF The TV features a power saving mode which will automatically
AUTOMATICALLY turn off the TV, if there's no signal provided for more than 5
AFTER 5 MINUTE minutes.
TV TURNS OFF The TV features an option to turn the TV off after 3 hours of no
AUTOMATICALLY operation (meaning you did not use the remote for 3+ hours).
AFTER 3 HOURS Please check the MENU to make sure that option is not
toggled.
MY TV PICTURE IS Check to see if you are under POWER SAVING mode for your
VERY DIM picture mode. Keep pressing the PICTURE button on the
remote control to cycle out of POWER SAVING.
SCEPTRE X460 HDTV User Manual
- 46 -
www.SCEPTRE.com