Connecting A Digital Audio Receiver With Coax Spdif - Sceptre X460BV-FHD User Manual

Connecting a Digital Audio Receiver with Coax SPDIF...

1. Make sure the power of HDTV and your receiver is turned off.
2. Obtain a coax SPDIF cable, connect it to your receiver's coax SPDIF
digital input and the coax SPDIF connection on the LINE OUT port
on the back of the HDTV.
3. Turn on the HDTV and your receiver.
Please Note:
•
If you want pure digital stream for your receiver to decode,
you must also configure the TV's OSD Sound->Digital
Audio Out function. Make sure the option is on 5.1CH.
•
If your receiver is making static noises when receiving
5.1CH, you must use the PCM option instead.
•
Please reference the receiver's manual as well, to make
sure the receiver is configured to receive signals correctly
from the TV.
• The TV's SPDIF out for 5.1CH is ONLY used for
antenna/cable connection. Any other incoming audio
signal will be passed out of SPDIF in PCM format.
- 20 -
www.SCEPTRE.com
SCEPTRE X460 HDTV User Manual