Ready To Watch Some Tv; If You've Connected Antenna Or Cable To The Tv - Sceptre X402BV-FHD User Manual

Ready to Watch Some TV?

Starting up the HDTV
1. Make sure your power cable is connected and the standby red light
in the front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV
and also your AV devices. Make sure they are all connected
securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.

If You've Connected Antenna or Cable to the TV...

If an antenna or cable (without a cable box) is connected to your TV's tuner,
you will need to go through an INITIAL SETUP process in order to watch the
TV.
1. Press MENU to open the menu
2. Use the ◄ or ► button to select the CHANNEL icon and press
- 25 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
↵ .