Table of Contents
Advertisement
Ready to Watch Some TV? (Optional)
1.
Make sure your power cable is connected and the standby red light in the front of the
HDTV is lit up.
2.
Check all your connection cables off the side or the back of your HDTV and also your
AV devices. Make sure they are all connected securely.
Turn on your HDTV and other AV devices if necessary. Select "HOME MODE".
3.
4.
Press the
control and select the correct source according to the Connecting pages.
If You've Connected Antenna to the HDTV...
If an antenna or cable (without a cable box) is connected to your TV's tuner, you will need to go
through an INITIAL SETUP process in order to watch the HDTV.
1.
Press MENU to open the menu
Use the ◄ or ► button to select the CHANNEL icon and press
2.
Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to select your
3.
connection either AIR or CABLE.
Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press
4.
for channels.
5.
Once the scanning finishes, you can begin to watch
button on the side of the HDTV or the SOURCE button on the remote
E246BD-FC / E246BV-FC
HDTV
Page | 4
.
ENTER
to scan
ENTER
Advertisement
Table of Contents
