Ready To Watch Some Tv; If You've Connected Antenna To The Tv - Sceptre U505CV-UMC User Manual

Ready to Watch Some TV?*

Starting up the UHD Display
1. Make sure your power cable is connected and the standby red light in the front of the
display is lit up.
2. Check all your connection cables off the side or the back of your display and also your
AV devices. Make sure they are all connected securely.
3. Turn on your display and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.

If You've Connected Antenna to the TV*...

If an antenna or cable (without a cable box) is connected to your display's TV tuner* , you will need
to go through an INITIAL SETUP process in order to watch the display.
1. Press MENU to open the menu
Use the ◄ or ► button to select the CHANNEL icon and press ENTER.
2.
Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to select your
3.
connection either AIR or CABLE.
Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press ENTER to scan
4.
for channels.
5. Once the scanning finishes, you can begin to watch display.
***TV Source is optional. It may not be equipped in your product. Please check with the seller, distributor or
Sceptre Customer Services.
- 25 -
www.SCEPTRE.com
SCEPTRE U Series CV-UMC UHD TV User Manual