Table of Contents
Advertisement
Installing the Main Unit in TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked
Center Panel
(*1)
Figure 6
*1. Some panel openings are too small for the unit depending on the vehicle type and model. In such a case,
trim the upper and lower sides of the panel frame by about 0.5 to 1.5 mm so the unit can be inserted smoothly.
*2. If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or similar tool.
Example 1
64
NX404AU
Main Unit
(*2)
Typical Mounting Brackets
Example 2
Affix the screws to the
marks.
are attached to the vehicle.)
8- Hexagonal screws
(M5x8)
Mounting bracket
(1 pair for the left and
right sides)
Example 3
Advertisement
Table of Contents
