Table of Contents
Advertisement
Chapter 4
1 ) Select the wireless network
for demostration.
2 ) Enter the exact same wireless settings of the Host network that you want to
connect to. Or click
Once a network is selected, its SSID, MAC address and security settings (except
the password) will be automatically filled in the respective fields. If the selected
network is protected, enter the password.
3 ) Click
Save
to save the settings.
4 ) Select the wireless network
settings. Here we take
5 ) The wireless radio is enabled by default. Customize the
(SSID)
and
Security
WPA/WPA2 - Personal, WPA/WPA2 - Enterprise and WEP. The default WPA/WPA2
- Personal is recommended. Enter a
access to your AP device.
Note:
1. If you want to automatically copy the same SSID and security settings as the Host AP, click the
SSID
button
.
2. If you want to hide this wireless network name, tick
6 ) Click
Save
to save the settings.
¾ Client Mode
If Client mode is selected, please take the following steps:
2.4GHz
or
5GHz
Wireless Scanner
and choose a Host network from the list.
2.4GHz
or
5GHz
2.4GHz
for demostration.
settings. The AP device provides four security options, None,
Password
Hide
to connect. Here we take
to configure the extended wireless
Wireless Network Name
below to prevent unauthorized
SSID.
2.4GHz
Copy Host
20
Advertisement
Table of Contents
