Table of Contents
Advertisement
Chapter 4
1. Visit http://tplinkap.net, then log in with the username and password you set for the
AP device.
2. Go to
Settings
> Wireless. And the following page decided by the mode of the AP
device will appear.
¾ Access Point Mode
If Access Point mode is selected, please take the following steps:
1 ) Select the wireless network
demostration.
2 ) The wireless radio is enabled by default. Customize the
and
Security
WPA2 - Personal, WPA/WPA2 - Enterprise and WEP. The default WPA/WPA2 -
Personal is recommended. Enter a
access to your AP device.
Note:
1. It is recommended to keep the default settings for other parameters. If it is necessary to change the related
parameters, please refer to the help page.
2. Tick
Hide SSID
if you want to hide this wireless network name.
3 ) Click
Save
to save all your settings.
In addition
•
Mode
- Select the transmission mode for your wireless client devices,
mixed,
802.11g/n mixed
2.4GHz
settings. The AP device provides four security options, None, WPA/
or
802.11n only
or 5GHz. Here we take
Password
below to prevent unauthorized
for
2.4GHz
and
2.4GHz
for
Network Name (SSID)
802.11b/g/n
802.11a/n/ac
mixed,
18
Advertisement
Table of Contents
