Advertisement
MAINTENANCE AND SERVICE
LEVERAGE requires very little upkeep to keep your equipment performing at its best, the following
guidelines are suggested.
GENERAL CLEANING
Wipe LEVERAGE with a light all-purpose cleaner, such as diluted Simple Green at a
30:1 solution.
Dry LEVERAGE with a soft cloth to prevent rust.
•BEARING GREASE PACKING
Before bearings 731-0842 and 731-2595 installed they must be fully
packed with general purpose Lithium Grade 2 grease.
•TIGHTENING OF THE TAPERED ROLLER BEARING ON ALL SHAFTS
•
To properly torque the tapper roller bearing:
With the tab washer NOT installed torque the bearing nut to 40-42 Lbs-Ft.(This will
square and seat the bearings)
Back the nut off, then install the tab washer.
Torque the nut to 7- 9 Lbs-Ft, now bend tabs on washers to lock in place.
Page 9
Advertisement
