Sony PS-LX310BT Operating Instructions Manual page 18

4
Remove the stylus protective cover.
Note
Remove the stylus protective cover with care
so as not to damage the stylus.
5
Press the START button.
Playback begins when the tone arm
automatically descends to its position,
which was set using the SIZE rotary
switch knob, at the beginning of the
vinyl record.
Note
• When closing the dust cover, close it slowly
to avoid making physical force that may
cause the stylus to skip.
• During playback, keep your hands away from
the tone arm and the turning vinyl record.
• During playback, do not change the settings
with the switches on the rear of your
turntable.
Stylus protective
cover
6
Adjust the volume using the audio
device.
To stop playback
Press the STOP button. The tone arm
returns to the tone arm rest. The platter
stops rotating.
To pause playback
Press the UP/DOWN button to raise the
stylus off the vinyl record. The platter keeps
rotating.
When playback is finished
The tone arm returns to the tone arm rest
automatically, then the platter stops
rotating.
To play a different part of the vinyl
record
1
After performing step 4, press the UP/
DOWN button to lift the tone arm.
Move the tone arm to the position you desire.
2
Press the UP/DOWN button.
The tone arm descends to the vinyl record,
then playback starts.
17