Assembly And Installation; Stand Assembly; Connect To Antenna; Connecting Power Supply - Kogan 7 EH7500 Series User Manual

ASSEMBLY AND INSTALLATION

BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.

1. Stand assembly

a. Align the stand to the corresponding openings in the TV body, ensuring L
and R letters match.
b. Insert each stand into the hole until the buckle locks into place. You will
hear a 'click' to confirm it is secure.
1a

2. Connect to antenna

a. Connect an antenna cable (not supplied) via the 'ANT' input port at the
back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either
via an antenna wall socket in your home, or directly.
2a
HDMI 1
MI 4 HDMI 3 HDMI 2 ANT
(ARC)
1b
Antenna
wall socket
2b
Antenna cable
DIGITAL
USB 2.0
R -AUDIO- L VIDEO AUDIO OUT
AUDIO OUT
(5V / 500mA)
AV
3. Connecting AC adapter
a. Connect the supplied AC adapter to the DC-in port at the back of the TV.
NOTE
Use only the AC adapter
supplied with this product (12v
). Using another power supply
may cause damage to the TV.
4. Turning TV on
a. Plug the other end of the AC adapter into a suitable power outlet. The
standby will display display red, showing that the TV is receiving power
but not turned on.
b. Press the POWER ( ) button (either on your remote control or the bottom
on the TV, as shown on page 5) to turn the TV on. The standby light will
display green when the TV is on.
TURNING TV OFF
POWER ( )
Press the
To power down the TV completely, unplug the power cord from the power
outlet.
(not supplied)
Do not leave your set in standby mode for long periods of time. If you will not
use the TV for a long time, it is recommended to unplug the set from both the
power outlet and aerial.
3a
button on the remote control to enter standby mode.
Red light on
4a
Standby mode
Green light on
4b
TV on
6