Wall-Mount Installation - Kogan 7 EH7500 Series User Manual

WALL MOUNTING
Wall mount kit not included. Steps below are provided as an optional
alternative to the supplied base-mounts.
A B
A Mounting bracket (x2)
B M4 x 10mm screw (x4)
8. Optional wall-mounting installation
a. Measure and double-check the distance of threaded holes on the back
panel of the TV before creating any holes in the wall.
b. Insert the 10mm screws (B) within the four threaded holes on the back
panel of the TV (8b) and tighten.
8b
C D
C M6 x 60mm self-tapping
screw (x4)
D Wall anchor (x4)
c. Use a mounting bracket (A) as a guide to mark the positions for the four
holes on the wall with a pencil.
d. Using a drill, create holes in the marked positions on the wall.
e. Insert the four wall anchors (D) into the screw holes in the wall.
f. Place the mounting brackets against the wall, aligned with the wall
anchors, ensuring the directional arrow is facing upwards.
g. Fix the mounting brackets with the 60mm self-tapping screws.
h. Attach the TV to the mounting brackets by placing all four of the screws
attached to the rear of the TV (B) into the larger openings of the brackets,
then lowering the TV so that the screws "lock" into place within the
brackets.
It is recommended that two people perform step 8h together to ensure the
sleeves are properly aligned before the TV is lowered onto the brackets.
A
8f
8g
C D
NOTE:
Only use wall-mounts that match the same size screws and fittings as those
listed on this page. Other methods of wall-mounting have not been tested for
this model and can not be guaranteed to safely support the TV.
8h
18